Alto 700W Active PA System-Speakers, Mixer with Effects

▲LTO introduce the NEW EVOlution of PS LITEPACK series. It obtains 10", 12" and 15" 2-way powered
speaker models with 24bit DSP built in.
Look at the specification below and see the amazing flexibility offered by our DSP to reinforce higher
performance and definition.
These speakers adopt newly developed drivers and woofer with Neodymium, as well as new CLASS D
amplification, thus achieving a light-weight and more impressive acoustics. Low output power: 350W (EIAJ)

• Power System: 350W Bi-Amp (300W-LOW/50W-HIGH) Continuous
  400W Bi-Amp (350W-LOW/65W-HIGH) in EIAJ Standard
• Frequency Response (|10dB): 47Hz-20kHz
• Maximum SPL @ 1m: 123dB Continuous/126dB Peak
• Coverage (H×V) : 90° × 45° nominal
• Transducer Low: 12" Neodymium Woofer, 2.5" voice coil
• Transducer High: 1" Driver/1.35" Voice coil
• Electronic Protections: Thermal/Convection-Fan/Overload/Dual Digital Lim./Compressor
• DSP Processor: Custom DSP at 24bit/48kHz
• Crossover Frequency: At 2kHz with 24dB filter slope, Linkwitz-Riley type
• Input Level: Line 0dBu
• Input Impedance: 30kΩ Balanced/15kΩ Unbalanced
• Input Connector: LINE-COMBO/LINK-XLR
• External Control: Volume Control/Power ON with Green LED/Clip Limiter with Red LED/
  Ground Lift
• Power Supply: AC-220/240V or AC-110/120 Volt, with Switching Power Mode
• Enclosure Construction: Trapezoidal shape/Floor Monitor facility/Polypropilene Plastic Cabinet
• Mounting: Integrated Std. pole-mount/two handle/three eyebolt point
• Dimensions (H×W×D): 660 × 396 × 384mm (26" × 15.6" × 15.1")
• Net Weight: 17.2kg (37.9 lb)

We are proud to announce a new model, which expands our best-seller LYNX-MIX series with another compact model.
LYNX-MIX82 is a very compact mixer with a lot of features generally found on larger models, like two Aux sends, 3-band EQ, and Tape In level knob.

Of course the LYNX-MIX82 FX is also provided with a powerful FX section.

We're sure all end-users will really appreciate the versatility of this mixer!

• 4 MIC input channels with gold plated XLR and balanced LINE input
• 2 stereo input channels with balanced TRS jacks
• Ultra-low noise discrete MIC pre-Amps with {48V Phantom power
• Extremely high head room offering extra dynamic range
• Balanced inputs for optimal signal integrity
• Warm, natural 3-band EQ on each channel
• Built-in 24 bits digital effects process 256 choices
  (16 presets × 16 variations)
  
• Peak LED on each channel
• 2 AUX sends pre-channel for external effect sand monitoring
• Main out put, Control room and head phone out puts
• 2-Track inputs assignable to main mix, control room/head phone out puts
• Highly accurate 8-segment bar-graph meters
• Dimensions (W×D×H): 256 × 250 × 72mm (10.1" × 9.8" × 2.8")
• Net Weight: 2.3kg (5.1 lb)